CATEGORIES


Diamond Cutter


Calander

Extractor bench

Sheerer

Wire drawing machine


Bench saw


Polishing machine


Winder


Wire squeezer


Milling machine


Sifter


Welder


 

 

DIAMOND CUTTER  

 

600.01: DIAMOND CUTTER

The diamond cutting machine is used for engraving personalised designson wires and tubes of circular cross-section from a minimum of 0.080mm to a maximum of 10mm. The machine can be equipped for triangular, square and rectangular forms. The machine does not remove metal so it is possible to engrave very thin material: 0.08-0.1mm.

 

VIEW PHOTO

 


 

CALENDER  

 

030: MANUAL CALANDER

This machine is suitable for the production of round earrings and bracelets, starting from a strip with folded or rounded sides, or held with a special die. Manual operation allows small production runs.
Brush movement
Dimensions: L15 x H22 x D20
Weight: ~ 10 KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

 

040: SMALL LOW-SPEED CALENDER

This machine is suitable for the production of round earrings and bracelets, starting from a strip with folded or rounded sides, or held with a special die which forms part of the equipment available on request with the rollers. The machine is operated with continuous or pedal-controlled rotation in both directions.
Power supply: three-phase 380 V 50 Hz.
Motor power: 0.37KW
Dimensions: L40 x H130 x D50
Weight: ~ 60KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

 

050: CALENDER WITH ADJUSTABLE SHEERER

This machine brings together in a single structure two separate work stages: • firstly, the cutting of the sheet with the sheer with a range from mm 2 to mm 60 and a maximum thickness of 0.8 mm. • secondly,circular formationof the strip obtained with the appropriate die or directly of the desired diameter. The machine is operated with continuous or pedal-controlled rotation in both directions.

Power supply: three-phase 380 V 50 Hz.
Motor power: 0.37KW
Dimensions: L55 x H130 x D45
Weight: ~ 75KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 


 

EXTRACTOR BENCH  

 

215.02: TWO OR FOUR PLACE EXTRACTOR BENCH

Workbench made of sheet metal and wooden work surface. Extraction equipment for each workplace

 

VIEW PHOTO

 


 

SHEERER  

 

080: MANUALLY ADJUSTABLE SHEERER

These sheerers are built to allow the cutting of strips of the desired dimensions, without the need to change the blade train. They have adjustable opposing blades to provide sheets with the edges cut to extreme precision on both sides. The cutting adjustment is micrometric and the blades are in tempered steel. They are equipped with a sheet guide device to obtain cutting linearity. Manual version.
Technical details:
Cutting range 2 mm to 60 mm.
Maximum cutting thickness 0.8 mm.
Power supply: three-phase 380 V 50 Hz.
Motor power: 0.37KW
Dimensions: L30 x H22 x D15
Weight: ~ 20KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

090: FIXED SPEED ADJUSTABLE SHEERER

These sheerers are built to allow the cutting of strips of the desired dimensions, without the need to change the blade train. They have adjustable opposing blades to provide sheets with the edges cut to extreme precision on both sides. The cutting adjustment is micrometric and the blades are in tempered steel. They are equipped with a sheet guide device to obtain cutting linearity. Manual version..
The cutting measurement can be read on a Vernier dial with decimal precision.
The sheet unwinder and winder are accessories available on request.
The machine is operated with continuous or pedal-controlled rotation in both directions.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 0.37KW
Dimensions: L130 x H50 x D40
Weight: ~ 60KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

125: PACKET SHEERER Ø 200

A very robust machine built for cutting several strips to a predefined size. The sheet metal base contains the movement mechanism. The cutting tower is made up of two steel shoulders, in which the shafts roll on brushes and make up the support for the rollers of the extractors. The machine is equipped with a device to facilitate the entry of the sheet towards the sheerers and a collection reel facilitates the recovery of the cut sheet. The machine is operated with continuous or pedal-controlled rotation in both directions, and can be supplied with variable speed.
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

128: SHEERERWITH FREE CUT

The circular sheers with free cut are designed for industrial purposes and are used in gold work processes, particularly for cutting operations of metal strips of variable length and with continuous adjustment of thickness. The machine is equipped with a workplace and requires the presence of a single operator and is controlled with continuous or pedal-controlled rotation in both directions.

 

VIEW PHOTO

 


 

DRAWER  

 

130: SERIAL DRAWER 1500 KG

The SERIAL DRAWERSare used in gold working processes, in particular the first phases of wire drawing operations. The drawing consists of the progressive reduction of diameters of metal wires (essentially of the noble metals), obtained by forcing the filament through special rings. The machine is equipped with a workspace and requires the presence of a single operator.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 2.2KW
Dimensions: L800 variable x H120 x D65
Weight: ~ 800 KGvariable
Workplace noise: < 70 dB(A)


VIEW PHOTO

 

 

140.01: BULL BLOCK TWO PASSES - ASPO Ø220

The drawing consists of the progressive reduction of diameters of metal wires (essentially of the noble metals), obtained by forcing the filament through special rings. Wire drawing in two passes permits two reductions of the wire at the same time in each work cycle and is used in goldsmithing, in particular for drawing wires made up essentially of noble metals. The machine is equipped with a workspace and requires the presence of a single operator. Three models are available with aspo of 220 mm., with aspo of 370 mm and with aspo of 500 mm. All models are equipped with dual working speedand on request can be supplied with electronicspeedcontrol: Wire drawing in two passes - aspo ø 220
Technical details:
Power supply: three-phase 50/60 Hz with earth, 380 V.
Motor traction: 2 / 4 poles, 2.5 / 1.8 KW
Dimensions: L146 x H118 x D72
Weight: ~ 250KG
Workplace noise: < 70 dB(A)
 

VIEW PHOTO

 

 

170: WIRE DRAWING IN SIX PASSES

The multiple drawer in six passes is designed for industrial purposes and is used in gold production processes, particularly in operations of successive reduction of the diameter of wires of noble materials (gold, silver, etc.) that undergo the desired transformation passing through the holes in specials matrices (BLOCKS). The machine is equipped with a workspace and requires the presence of a single operator .
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 2.2KW
Dimensions: L120 x H126 x D75
Weight ~ 325KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

180: WIRE DRAWING IN TWELVE PASSES

The circular sheerers are designed for industrial use and are used in gold production processes, particularly in operations for the slicing of metal strips of varying lengths with continuous adjustment of the thickness. The machine is equipped with a workspace and requires the presence of a single operator. It is operated with continuous movement in both directions or by pedal.

 

VIEW PHOTO

 


 

BENCH SAW  

 

190: BENCH SAW

The CIRCULAR SAW is designed for industrial use and is used in gold production processes, particularly of manual cutting of metallic details. The machine is equipped with a workspace and requires the presence of a single operator.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 0.37KW
Dimensions: L65 x H67 x d48
Weight: ~ 43KG
Workplace noise: < 70 dB(A)
 

VIEW PHOTO

 


 

POLISHER  

 

211: POLISHER 18 FILTER CLEANER BAGS 2 ENGINES

The POLISHER is a machine for industrial use and is used in the gold sector for the smoothing of objects in noble materials (gold, silver, etc.). The machine can be used for polishing small objects such as earrings, pendants, rings, etc. with the of band-type abrasive brushes . The use of abrasive tools such as grindstones or similar is prohibited.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: extractor 2.2KW
Motor powerbrushes: 1.5KW
Dimensions: L190 x H186 x D116
Weight ~ 300KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 


 

WINDER  

 

240: WINDER WITH EXPELLER

The WINDER is a machine designed for industrial use inthe gold sector that, with various devices, permits oval or circular winding of metal wires or tubes. The machine is equipped with a workspace and requires the presence of a single operator.
Technical details:
Power supply: three-phase 220 V 50 Hz.
Motor power: 0.75KW
Dimensions: L105 x H110 x D50
Weight: ~ 140KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 


 

WIREPRESS  

 

280.A1: WIREPRESS Ø 60 WITH RECLINING HEAD WITH WINDER ASPO FOR WIRE

The WIREPRESS machine is used in gold industrial processes, particularly for sheet laminating and wire working. The possibility of substiting the rollers with personalised versions allows the production of various effects, from the simple lamination of strips with the smooth rollers to the treatment of surfaces with designs. The machine is equipped with a workspace and requires the presence of a single operator.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 0.75KW
Dimensions: L65 x H130 x D60
Weight ~ 190KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 


 

PULVERISING MILL  

 

500: ROTOR PULVERISING MILL Ø 800

The PULVERISING MILL is an industrial machine use in the gold sector. The machine is used for grinding materials of the production cycles that once pulverised can be introduced into recovery phases for the extraction of the nobles metals contained.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 2.2KW
Dimensions: L165 x H170 x D100
Weight ~ 700KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 


 

SIFTER  

 

530: WOODEN SIFTER 2 HOLES VARIABLE SPEED Ø550

IThe SIFTER with wooden case, designed for industrial use, is used in gold working processes for dry surface finishing if metal or plastic objects of any shape and size. Walnut granules, maize husks and wooden pieces of various shapes, sizes and hardness can be used according to requirements. With the presence of separate compartments accessible via door flaps, it is possible to carry out operations of rough grinding, smoothing, polishing and shining. The operation of the machine is completely automated and does not require the constant presence of an operator other than for loading-unloading and for setting the parameters. For the optimisation of results and working times, the machine is equipped with an electronic regulator and a timer for the motor inversions.
Technical details:
Power supply: three-phase 220 V 50 Hz.
Motor power: 0.75KW
Dimensions: L163 x H133 x D86
Weight: ~ 120KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

535: TURBO SIFTER Ø500

TURB SIFTERS areused in goldprocesses, in particular in operations of surface finishing of objects, subjecting them to the abrasive action of appropriate granular products. Until now, the traditional type of surface finishing needed four phases of work, two wet and two dry, and also required treatment of the waste water. The result of this process translated into high costs and low productivity The particularly work methodology of the turbo sifter permits the elimination of the two wet phases and the relative treatment of the waste water. The machine also permits the widening of the range of objects that can normally be processed to include those of extreme delicacy without the risk of denting as a result of the absence in the work area of mechanical obstacles and thus of the impact caused by them on the items being treated. The abrasive action is carried out solely by the granular products via the motion induced by the turbo disk to the mass being processed. The machine facilitates the processing of objects such as chains, which by their nature can cause difficulties during various finishing processes with non-uniform results over the object. Accessories include the predisposition for a refrigerating group.
Technical details:
Power supply: three-phase 380 V 50 Hz.
Motor power: 2.2KW
Blowing Power: 0.2KW
Dimensions: L75 x H160 x D91
Weight: ~ 250KG
Workplace noise: < 70 dB(A)
 

VIEW PHOTO

 


 

WELDER  

 

565: TUBE WELDER

The TUBE WELDER is used in the gold industry for welding metals. The possibility of changing the movement rollers permits the welding of tubes of various sizes. The machine is equipped with a workspace and requires the presence of a single operator.
Technical details:
Power supply: three-phase 220 V 50 Hz.
Motor power: 0.18KW
Dimensions: L50 x H116 x D70
Weight: ~ 90KG
Workplace noise: < 70 dB(A)

 

VIEW PHOTO

 

 

 

Top

Credits

Reserved Area